Home > Our Product Lines > A Series > AT Series

AT Series

Plastic Connectors- AT -Amphenol-Sine-Systems

AT Series™ connectors are a high-performance, cost-effective solution able to be used in a variety of interconnect applications: Heavy Duty, Transportation, Marine, Diagnostic, Military, Alternative Energy and Agricultural. They contain superior environmental seals and seal retention capabilities.

The connector design incorporates an integral latching system that ensures a definitive electrical and mechanical connection. Connector housings are manufactured with a thermoplastic material that is not only durable, but has excellent UV resistance, dielectric/mechanical properties and environmentally RoHS compliant. The sealing system is comprised of front and rear silicone seals, multi-sealing perimeter against environmental ingress. Contacts are derived from quality copper alloy to ensure an electrically-reliable connection.

AT Series™ connectors are compatible with other existing standard products industry-wide.

Wedgelocks
Contacts
AT PanelMate
Structure Plus
AT Over-Mold Compatible (OMC)

Accessories and Tools

FEATURES & BENEFITS

Current Capacity		Size 16, 13A (max)
Wire Range		Size 16 contacts will accept wire ranges of 14 thru 20AWG
Temperature		Operating temperature range: -55°C to +125°C at rated current
Dielectric Value		Meets or exceeds 1500 volts minimum
Drop Test		Shall not become detached or loosened when placed at 750mm and dropped to concrete eight times
Shock		No latch disengagement or discontinuity shall be the result when subjected to 50 g’s in each of three axis (X, Y & Z)
Vibration		Continued continuity without degradation to mechanical or physical attributes following vibration. (max acceleration 20 g’s at Sine sweep of 10-2000Hz)
Connector Terminal Retention		When subjected to a direct pull, contacts achieve a minimum pull-out force of 25 lbs.
Connector Retention		A mated connector subjected to a pulling force by the exiting wire bundle at 25 lbs. times the number of contacts to a maximum of 100 lbs. applying load for 30 seconds
Thermal Shock		Subjected to 10 cycles at -55°C to +125°C with no cracking, chipping or other damage detrimental to the normal operation of the connector
Insulation Resistance		1000 megohms minimum at 25°C
Mating Cycle Durability		Following 100 cycles of connection engagement and disengagement, degradation either mechanical or electrical is not evident
Contact Millivolt Drop		Size 16 contacts with 16AWG conductor - 100 mV drop max at 13A test current
Water Immersion		A mated connection, properly wired, placed in an oven at +125°C for 1 hour, then placed immediately in a depth of water of 1 meter for 4 hours without loss of electronic performance

PRODUCT MATERIAL
Housings		Thermoplastic
Seals		Silicone Elastomer
Secondary Locks		Thermoplastic
Contacts		Copper Alloy, Nickel Plated, Gold optional