DuraMate

ADHP DuraMate Circular Plastic Connectors for Heavy Duty Applications

Available in Size 24 with 7, 19, 21,23, 27, 29, 31 and 47 Insert Arrangements
Available in Size 18 with a 14 Insert Arrangement

downloadable catalog 



The AHDP Dura|Mate™ environmentally sealed multi-pin thermoplastic circular connector series provides an economical quick-connect bayonet locking system manufactured to withstand the challenges and complexities of harsh environment off-road applications.


While maintaining compatibility with existing shell size 24 industry standard designs, ease of use was exceeded through enhanced ergonomics using an easy grip coupling system and visual and tactile indicators ensuring reliable mating confirmation.  Wire management improvements include two different back shell systems that thread onto the rear of the connectors to provide strain relief and additional wire seal protection.  The low cost, tie wrap option and the fully enclosed back shell are interchangeable for specific application requirements.

Its rugged high performance capability is ideal for panel mount or in-line heavy-duty applications such as commercial vehicle, agriculture, construction or marine installations.





Click on a faceview below to see available parts

       
 18-14
14 Size 16
 24-7
6 Size 12
1 Size 8 RADSOK®
 24-19
6 Size 12
13 Size 16
 24-21
4 Size 12
17 Size 16
24-23
23 Size 16
 
24-27
4 Size 12
23 Size 16

24-29
4 Size 12
19 Size 16
6 Size 20
24-31
31 Size 16
24-47
42 Size 20
5 Size 16
         


Features and Benefits

  • Polarized for proper mating of connector halves
  • High density signal and mixed power insert configurations
  • Available in Size 24 with 5 insert arrangements (7, 19, 23, 29, 31)
  • Operating temperature range: -55C to +125C
  • High current configurations incorporating revolutionary RADSOK® contacts
  • High strength impact resistant & lightweight thermoplastic housings
  • Contacts available in economical reel-mounted high volume machine termination or in machined
    loose-piece form.
  • Low insertion force stamped terminals offer improved manufacturing efficiencies 
  • Wire entry sealing available in three separate ranges for discrete wire applications: 

          Recommended Wire Insulation Overall Diameter (OD)

Contact Size

Normal Seal

Thin Seal

Reduced Seal

20

N/A

N/A

1.02mm (.040”) - 2.41mm (.095”)

16

2.54mm (.100”) - 3.40 mm (.134”)

2.23mm (.088”) - 3.40mm (.134”)

1.35mm (.053”) - 3.05mm (.120”)

12

3.43mm (.135”) - 4.32mm (.170”)

N/A

2.46mm (.097”) - 4.01mm (.158“)

 8

4.83mm (.190”) - 6.10mm (.240”)

N/A

N/A











  • Standard WTA(Wide Thread Adapter) provides maximum access to rear grommet and improved serviceability.
  • Engineered rapid and secure mating system achieves IP67 protection from ingress of dust, water mud and other contaminants
  • Redundant sealing features consisting of durable high temperature silicone provide barrier from lubricating oils, hydraulic fluids and fossil fuels
  • Rigid back shells maintain a compression-fit design to resist maximum pull-out forces and facilitate strain-relief for jacketed cable ranges.
  • Utilizes industry standard contact system
  • Environmentally-sealed to IP67 and vibration resistant

Performance Specifications

Shell Specifications

Current Rating per Contact

Size 8, 80A; Size 12, 25A; Size 16, 13A; Size 20, 7.5A

Coupling Nut

Thermoplastic

Operating Temperature

-55°C to +125°C

Insulation Insert

Thermoplastic

Dielectric Withstanding Voltage

Current Leakage - 12 milliamp at 1500 VAC

Seal

Silicone Rubber

Degree of Protection

IP67

Color

Black

Mating Cycle Durability

100 Cycles

Contact

Common System

RoHS

Compliant














  • Wide threaded collar ring for increased serviceability and connector access
  • Highly visible indicators for quick alignment and 100% positive mating 
  • Enclosed 1-piece threaded backshell with low-cost strain relief
  • Optional 2-piece threaded backshell with compression nut 
  • Contact removal tools 
  • RADSOK® contacts 
  • Panel Nut, Size 24

  • For more information, contact:
    Don Hunsucker, Product Manager, +1 586 913 8638, dhunsucker@amphenol-sine.com
    Eric Schwegman, Market Manager, +1 937 242 6212, eschwegman@amphenol-sine.com

    downloadable catalog