1. Home
  2. Our Product Lines
  3. Smart Card C700
  4. C702A PUSHMATIC®
  5. C70210M0087012 PUSHMATIC® 5V. For use in applications such as vending machines, access control systems and telematics. Features include landing, self cleaning contacts, 500K mating cycles and card presence switch.
C70210M0087012 PUSHMATIC® 5V. For use in applications such as vending machines, access control systems and telematics. Features include landing, self cleaning contacts, 500K mating cycles and card presence switch.
C70210M0087012 PUSHMATIC® 5V. For use in applications such as vending machines, access control systems and telematics. Features include landing, self cleaning contacts, 500K mating cycles and card presence switch.

C70210M0087012 PUSHMATIC® 5V. For use in applications such as vending machines, access control systems and telematics. Features include landing, self cleaning contacts, 500K mating cycles and card presence switch.

$0.00
C702A PUSHMATIC®
PART NUMBER: C70210M0087012

SPECIFICATIONS:

  • Shock (w/o Disconnection): < 10 g; 11 ms; halfsine 2 shocks / direction in 3 axis
  • Insulation Resistance: < 10(9) mΩ
  • Contact Resistance: < 100 mΩ data; < 200 mΩ switch
  • Shock (w/o Destruction): < 200 g; 6 ms; halfsine 2 shocks / direction in 3 axis
  • Chattering Time: < 5 ms
  • Extraction Force: < 5 N
  • Pulse Break: > 0.5 s
  • Unlocking Solenoid Current Pulse Length: 10-25 ms
  • Unlocking Solenoid Current Consumption: 2.5 A ± 10%
  • Climatic Category: 25 / 85 / 21
  • Operating Temperature: -25°C to +85°C
  • Storage Temperature: -25°C to +85°C
  • Mechanical Lifetime: 300,000 mating cycles
  • Unlocking Solenoid Rated Voltage: 5 V ± 10%
  • Power Failure Solenoid Rated Voltage: 5 V ± 10%
  • Voltage Proof: 500V
  • Locking Detector: Activated when contact system is locked. Switch rating 100mA / 12V.
  • Vibration: f = 10 to 60 Hz; 0.5 mm DA; f = 60 to 500 Hz; a = 2.5 g; 2 h / Axis
  • Contact Method: Landing Contacts
  • Style: Mounted on a 3.5 inch or 5.25 inch disk drive frame
  • EMV Switch: Normally open
  • Suitable Connector: Pin header IEC 60603-13, 10 pol bzw. 20 pol Amphenol Series 816 and 821
  • Card Handling: PUSHMATIC
  • Unlocking Solenoid: Solenoid termination: wire 0.09 mm2 / AWG 286
  • Switch Sequence: The card presence switch is activated after the data contacts have mated with the card pads and before the card reaches its final position. This sequence will take place for the minimum sized card pads (and larger) acc. to ISO 7816.
PUSHMATIC® 5V. For use in applications such as vending machines, access control systems and telematics. Features include landing, self cleaning contacts, 500K mating cycles and card presence switch.

Related Items

Smart Card Connectors Catalog
Smart Card Connectors Catalog
REQUEST A QUOTE

Recently Viewed Items

Logo